Plate limits by table
Each table is rated for a plate thickness. The Lite tables take plate up to 16mm, or up to 35mm when the table is seam welded. The standalone P-TABLE/2030 for the Standard machine takes up to 20mm plate, or 50mm seam welded.
| SKU | Table |
|---|---|
| P-TABLE/0606/P | 600×600mm Cutting Table with Water Table takes ≤16mm Mild Steel Plate and ≤35mm when Seam Welded for MetalWise Lite CNC Cutting Machine |
| P-TABLE/0613/P | 600×1300mm Cutting Table with Water Table takes ≤16mm Mild Steel Plate and ≤35mm when Seam Welded for MetalWise Lite CNC Cutting Machine |
| P-TABLE/1313/P | 1300×1300mm Cutting Table with Water Table takes ≤16mm Mild Steel Plate and ≤35mm when Seam Welded for MetalWise Lite CNC Cutting Machine |
| P-TABLE/1318/P | 1300×1800mm Cutting Table with Water Table takes ≤16mm Mild Steel Plate and ≤35mm when Seam Welded for MetalWise Lite CNC Cutting Machine |
| P-TABLE/1325/P | 1300×2500mm Cutting Table with Water Table takes ≤16mm Mild Steel Plate and ≤35mm when Seam Welded for MetalWise Lite CNC Cutting Machine |
| P-TABLE/1518/P | 1500×1800mm Cutting Table with Water Table takes ≤16mm Mild Steel Plate and ≤35mm when Seam Welded for MetalWise Lite CNC Cutting Machine |
| P-TABLE/1524/P | 1500×2400mm Cutting Table with Water Table takes ≤16mm Mild Steel Plate and ≤35mm when Seam Welded for MetalWise Lite CNC Cutting Machine |
| P-TABLE/1530/P | 1500×3000mm Cutting Table with Water Table takes ≤35mm for MetalWise Lite CNC Cutting Machine |
| P-TABLE/1535/P | 1500×3500mm Cutting Table with Water Table takes ≤16mm Mild Steel Plate and ≤35mm when Seam Welded for MetalWise Lite CNC Cutting Machine |
| P-TABLE/2030 | 2000×3000mm Standalone Cutting Table with Water Table takes ≤20mm Mild Steel Plate and ≤50mm when Seam Welded for MetalWise Standard CNC Plasma Cutter |
| P-TABLE/2360 | 2300x6000mm Sectioned Water Cutting Steel Table for MetalWise Lite Due-Support Gantry CNC Plasma Cutting Machine, 6+ Silicone Gasket Makers Needed for Water Sealing (Not Included) |
The sectioned 2300×6000mm table
P-TABLE/2360 is built in sections for the Lite Due-Support gantry. Seal the joints with silicone gasket maker before filling. AM.CO.ZA notes that six or more tubes are needed and they are not included.
Daily and weekly care
- Keep the water level close to the underside of the plate so the cut smoke is trapped
- Knock slag off the slats before it builds into a ridge that lifts the plate
- Turn or replace slats once the tops are cut through
- Drain and clean the tray when the sludge starts to fill the bottom
A level, clean bed is half of good cut quality, because the torch height control can only correct so much movement in the plate.